Got stuck with 4th ARUNMOR mission "ARCInfiltration&
Moderators: jelco, bert_the_turtle, Chris, Icepick, Rkiver, Punisher Bass
Got stuck with 4th ARUNMOR mission "ARCInfiltration&
Greetings, everyone.
frist thank you for reading this..
i got stuck with 4th Arunmor mission, i made my way into the LAN, i unlock all gate as i can reach, i passed the wirless thingys, at the the computer stored a tele number i did write it down...
but problem is...what should i do with the numbers? the ARC LAN have a some PC cant reachable(so far, no more wirless)....
Can i any tell me what i missied? or that LAN have more then 1 wirless revicer?
I did search at the froum but nothing meet the issus...or i missed..
Thank you
frist thank you for reading this..
i got stuck with 4th Arunmor mission, i made my way into the LAN, i unlock all gate as i can reach, i passed the wirless thingys, at the the computer stored a tele number i did write it down...
but problem is...what should i do with the numbers? the ARC LAN have a some PC cant reachable(so far, no more wirless)....
Can i any tell me what i missied? or that LAN have more then 1 wirless revicer?
I did search at the froum but nothing meet the issus...or i missed..
Thank you
- ScareyedHawk
- level5
- Posts: 1156
- Joined: Wed Sep 17, 2003 10:14 pm
- Location: Västerås, Sweden
As it says in the Ultimate Uplink Guide, what you found is the phone number for a modem. Buy the IP_lookup tool and input the number there. It will then be added to your list of links.
[edit]Stupid typo.[/edit]
[edit]Stupid typo.[/edit]
Last edited by ScareyedHawk on Sun Aug 27, 2006 6:27 pm, edited 1 time in total.
i need help
also i really need help (lack of understanding) well every time i try to connect to the LAN it says u have been loged plz disconnet blah blah wat should i do??
yea
yea i have all the upgrades the best gatway and alot left over im sitting in the main acsses unable to connect to anything.... and i did the scan and the probe.. but nothing is connected to me
-
- level1
- Posts: 19
- Joined: Thu Aug 17, 2006 9:54 pm
It may be a Central Mainframe, if you get the Failed to Connect thing, you have to bounce to a server owned by the company you want to connect to, for example I want to hack the ARC Central Mainframe, I need to connect through an ARC Internal Services Machine or an ARC Public Access Terminal. I'm sure you can use Access Terminals and other Central Mainframes or LANs but I'm not sure. I also don't know if this is only for Central Mainframes, it may apply to some LANs, I can't remember but I don't think so.
im also stuck on this mission, i get near the end of the lan and try to access the last authentication server but when i click on connect it does nothing. also when i click on the authenticatio nserver the valid subnet terminal has a yellow outline, so i connect to it but still can't connect to the authentication server.
dear all... i spent 3 hour to pass that mission... and "make friend" with attack LAN. ARC LAN is first LAN i meet...
First,just bounce and connect to LAN
Next, Monitor and Proxy Bypass
Next, open LAN view
you will see a router
use LAN Scan(or Probe) to see all system on it.
Next, just simple press to hub next the router
You will see a dot line from router to hub... this means, u are now in that hub... u can back by press "back"
so on to all system...
on 1 system u can see:
- back: no need explain more
- reset: no need intention
-connect: use to connect to system that u are in.
if u can not create dot line to one sustem... may be:
- no line to that system
- have a lock
- have a subnet near.(Valid Subnet)
you can press to system u want and see what have a yellow dot line ..
is u see valid subnet, use the LAN spoof to disable it.
if u see lock, u can find a Authentication Server control it.. u can see it by press to lock.find a way to Authentication Server and break it, then disable lock.
or u can use Lan Force, it not good choice, because u have notice admin to find u...
so u have unlocked the lock, then use Lan probe to find way next
u can see something else :Isolation Bridge,Wireless Receiver,Wireless Transmitter....
when u see a Wireless Transmitter, u must find a Terminal, it will show u frequency of Wireless Receiver.
some lock is control by Isolation Bridge, u must reach and break to it to toggle status of lock.
if u find a number as a local number, just disconnect and find it by IP Lookup, route to it and u will see u are in a phone next to a Authentication Server...
this is all my experience... hope it help u...
First,just bounce and connect to LAN
Next, Monitor and Proxy Bypass
Next, open LAN view
you will see a router
use LAN Scan(or Probe) to see all system on it.
Next, just simple press to hub next the router
You will see a dot line from router to hub... this means, u are now in that hub... u can back by press "back"
so on to all system...
on 1 system u can see:
- back: no need explain more
- reset: no need intention
-connect: use to connect to system that u are in.
if u can not create dot line to one sustem... may be:
- no line to that system
- have a lock
- have a subnet near.(Valid Subnet)
you can press to system u want and see what have a yellow dot line ..
is u see valid subnet, use the LAN spoof to disable it.
if u see lock, u can find a Authentication Server control it.. u can see it by press to lock.find a way to Authentication Server and break it, then disable lock.
or u can use Lan Force, it not good choice, because u have notice admin to find u...
so u have unlocked the lock, then use Lan probe to find way next
u can see something else :Isolation Bridge,Wireless Receiver,Wireless Transmitter....
when u see a Wireless Transmitter, u must find a Terminal, it will show u frequency of Wireless Receiver.
some lock is control by Isolation Bridge, u must reach and break to it to toggle status of lock.
if u find a number as a local number, just disconnect and find it by IP Lookup, route to it and u will see u are in a phone next to a Authentication Server...
this is all my experience... hope it help u...
Stop posting you utter fool. Seriously.
1) The topic is over 18 months old.
2) Writing like an AOLese idiot just looks daft.
1) The topic is over 18 months old.
2) Writing like an AOLese idiot just looks daft.
Uplink help: Read the FAQ
I know that these is an old topic, but I need some help and I couldn't find any place where I can found that help, i get stuck not only in the 4th mission of arumor, I also get stuck when I tried to hack any LAN whith a valid subnet, and I don't know how and where use the LAN Spoof, I have every software, hardware, etc, but I DONT KNOW how to Hack that kind of LAN,
Please somebody HELP ME!!!!!
Please somebody HELP ME!!!!!
Who is online
Users browsing this forum: No registered users and 6 guests