STEP 1: [OPTIONAL] REINSTALL Uplink v1.55 (Or whatever version you use)
STEP 2: [OPTIONAL] REINSTALL Fraps (Any version)
STEP 3: Open Uplink
STEP 4: Go to 'options'
STEP 5: Go to 'Edit Graphics Options' (The monitor icon)
STEP 6: Make sure 'softwarerendering', 'softwaremouse', and 'safemode' are DISABLED
STEP 7: Set it so refresh rate is at 60Hz and Color depth is at true color (32-bit)
STEP 8: Click 'Apply Changes'
**A prompt should come up saying 'Uplink must be restarted before these changes take effect'
STEP 9: Click 'Close'
STEP 10: Start Uplink
**If fraps is open, the FPS counter should appear.
_______________________________________________________________________________________
Have fun!!!
**If this doesn't work, post what happened to this thread including:
OS (Operating System):
Uplink Version:
Fraps Version:
Programs Running while you attempted the above:
64-Bit or 32-Bit:
Graphics/Video Card/Chip:
Graphics options in Uplink:
** With that info, me or some nice person on the forums should be able to help you.
** I hope this helps you frapsers to record on uplink, tell me if it worked!b