Motion Sensor Staying Red - Newbie Question

Stuck in Uplink? Need Help?

Moderators: jelco, bert_the_turtle, Chris, Icepick, Rkiver, Punisher Bass

Lexusjjss
level0
Posts: 2
Joined: Fri Apr 29, 2011 2:24 am

Motion Sensor Staying Red - Newbie Question

Postby Lexusjjss » Fri Apr 29, 2011 2:31 am

Hey everyone, Cpt. Noob here....

I have the trinity what'd-ma-call-it gate way. (The highest one)
I installed 2 motion sensors and 1 self destruct....
Even after they were installed, the motion sensors stay red, but I haven't got caught, even after i have fast forwarded for a while...
:?: :?: :?:
x-razor
level0
Posts: 4
Joined: Fri Apr 15, 2011 5:39 pm

Postby x-razor » Mon May 02, 2011 5:08 am

That is because the installers are testing your hardware and will be red for some minutes.
Simply advance the time and they will change to normal status.
orillian
level4
level4
Posts: 585
Joined: Fri Nov 16, 2007 8:41 pm

Postby orillian » Mon May 02, 2011 12:30 pm

He said he already did. As for the installers it shouldnt be red with them around, it would be orange if memory serves for installers, only for FBI does it go red, and why did you install two anyway? But as for it staying red, it could be a glitch, what version are you using? and how long have you fast forwarded for and have you logged off and back on again to see if that fixed it?
Lexusjjss
level0
Posts: 2
Joined: Fri Apr 29, 2011 2:24 am

Postby Lexusjjss » Thu May 05, 2011 2:46 am

I am using v1.55... and have logged off and on several times (like 10). It still stays on, and I have last had hardware installed about a month ago (Uplink time)...
alrazi
level0
Posts: 5
Joined: Sun Mar 27, 2011 8:57 am
Location: Bandung
Contact:

Postby alrazi » Wed May 25, 2011 10:11 am

why u buy two of motion sensor? u can save that money for another hard or soft.

have u to destroy ur gateway and start the new one?? is that still red??

Return to “Hints and Tips”

Who is online

Users browsing this forum: No registered users and 7 guests