Hacking the first LAN

[Mah]

Iam stuck at my first LAN, what to do?

Screenshots:

To the left:



Little to the down/south



Reset-to the right



In the middle:




All my LAN software is V.3 and the highest upgreat.
I hacked all I saw in the lan, but afther hacking the terminal, I dont know where to go.

Hacked terminal:

[Rkiver]

See that local dial up number, that's where you go next.

Also you didn't need to post this in two places. I've deleted the other one.

[Mah]

Thanks mate, but I dont really know how to use the dial-up number.
Do I need to use the IP-lookup and connect to it with bouce, or do I need to use it in someway within the lan-system?

[DinoSteve]

Thanks mate, but I dont really know how to use the dial-up number.
Do I need to use the IP-lookup and connect to it with bouce, or do I need to use it in someway within the lan-system?

Read this.

[Mah]

Thanks mate, I got it.
But I ront really know where to go from the router, it only is connected to a lock.

I have read the uplink guide, but I cant seem me my way throu it.

[DinoSteve]

Looks like you didn't finish revealing everything on the first portion of the LAN (note all those unconnected nodes). Did you LAN_probe every node (LAN_probe is better than LAN_scan)? When probing locks they have to be unlocked/disabled for LAN_Probe to work properly. When you click the lock does a yellow box appear anywhere (move the view point around to make sure)? If probing everything (even that terminal after the lock) doesn't reveal anything that controls that lock then you have to use LAN_force on it. This will cause the admin to log on but you can disconnect then reconnect and the lock will remain open.

Reading through this topic and this one should be enough to tell you everything there is to know about LANs.

If after all that you still can't reveal the entire LAN, upload your usr and tmp file (with the bounce connection saved) to Sharebee so I can have a look.

[Mah]

Got it, many thanks!

[DinoSteve]

As asked in my previous post, when you click the lock does a yellow box appear anywhere? The answer is yes, and it is a hint of where to search:



In this case, you failed to disable the lock before using LAN_probe on it:



When you've revealed the entire LAN you should end up with something like this:


Note: Subnets are explained in one of the topics I linked to.

[bjadycz]

I'm doing mission for Arunmor when I must hack the ARC Local Area Network, I finally find a terminal with Dial-Up number, but when i connect there, there is just Modem and Main server, so i haven't enough time for copy files. I can use "Voice analyser" and Decypher" than i can go to "files", but than the administrator disconnect me

[orillian]

this has been answered thousands of times. There is nothing you can do about it. For further information, try the forum search function.