I really enjoyed the demo of Darwinia, si I bougt it.
The installation processu begins normally, and at a certain time, I get this message :
"Please insert Darwinia CD.
Choose Yes to retry, No to cancel"
When I click "Yes", the pop up appears again, the cdrom is still unmounted. So I tried to mount manually the cdrom, same problem.
That's my output :
Code: Select all
vineus@bloutchparadise:~/dl> ./darwinia-full-1.3.0.sh [2006-09-16 18:45:53]
Verifying archive integrity... All good.
Uncompressing Darwinia full 1.3.0......................................................................
mount: special device /dev/cdroms/cdrom0 does not exist
mount: block device /dev/cdrom is write-protected, mounting read-only
loki_setup: Mounted device /dev/cdrom
mount: special device /dev/sda1 does not exist
mount: special device /dev/cdroms/cdrom0 does not exist
mount: block device /dev/cdrom is write-protected, mounting read-only
mount: /dev/cdrom already mounted or /mnt/cdrom busy
mount: according to mtab, /dev/hdc is already mounted on /mnt/cdrom
mount: special device /dev/sda1 does not exist
loki_setup: Unmounting device /dev/cdrom
At this time, the pop up appears, so when I click "Yes", I get:
Code: Select all
mount: special device /dev/cdroms/cdrom0 does not exist
mount: block device /dev/cdrom is write-protected, mounting read-only
loki_setup: Mounted device /dev/cdrom
mount: special device /dev/sda1 does not exist
loki_setup: Unmounting device /dev/cdrom
if on another term I mount the cd :
Code: Select all
vineus@bloutchparadise:~> mount /dev/cdrom [2006-09-16 18:50:31]
mount: block device /dev/cdrom is write-protected, mounting read-only
vineus@bloutchparadise:~> ls /mnt/cdrom [2006-09-16 18:50:42]
AUTORUN.INF Setup.exe Setup.ini data1.cab data1.hdr data2.cab data3.cab data4.cab data5.cab data6.cab ikernel.ex_ layout.bin setup.inx
And reclick "Yes", I have the same problem (same mount message on the darwinia-full script and same pop up)
I saw another message with pretty the same issue, and the problem was the cdrom fs format, so here is my fstab :
Code: Select all
vineus@bloutchparadise:~> cat /etc/fstab [2006-09-16 18:45:44]
# /etc/fstab: static file system information.
# $Header: /var/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.18.4.1 2005/01/31 23:05:14 vapier Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# See the manpage fstab(5) for more information.
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 defaults,noatime 1 2
/dev/hda3 / ext3 noatime 0 1
/dev/hda2 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,users 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,users 0 0
/dev/fd0 /mnt/floppy auto noauto,users 0 0
/dev/hda4 /home ext3 noatime 0 1
# win disks
/dev/hdb2 /mnt/win2 ntfs noatime,users 0 1
/dev/hdd1 /mnt/win3 vfat noatime 0 1
# usb disk
/dev/sda1 /mnt/usb auto noauto,users 0 0
# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
and mtab :
Code: Select all
vineus@bloutchparadise:~> cat /etc/mtab [2006-09-16 18:53:07]
/dev/hda3 / ext3 rw,noatime 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw,nosuid 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
/dev/hda1 /boot ext2 rw,noatime 0 0
/dev/hda4 /home ext3 rw,noatime 0 0
/dev/hdb2 /mnt/win2 ntfs rw,noexec,nosuid,nodev,noatime 0 0
/dev/hdd1 /mnt/win3 vfat rw,noatime 0 0
shm /dev/shm tmpfs rw,noexec,nosuid,nodev 0 0
usbfs /proc/bus/usb usbfs rw,noexec,nosuid,devmode=0664,devgid=85 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0
nfsd /proc/fs/nfs nfsd rw 0 0
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
//192.168.0.9/mp3 /mnt/tv smbfs 0 0 0
/dev/hdc /mnt/cdrom iso9660 ro,noexec,nosuid,nodev 0 0
I have a gentoo bx, kernel 2.6.15-r1
Any ideas ? I tried to fix this on installation scripts, but they are no references to cdrom on the scripts. I tried to install with the non graphical interface to.
Thank you a lot for your help