darwinia beta 5 crashes on my hardware.

Problems with the Linux version of Darwinia

Moderators: bert_the_turtle, jelco, Chris, andy, John

sleon
level0
Posts: 5
Joined: Mon Nov 15, 2004 9:21 am

darwinia beta 5 crashes on my hardware.

Postby sleon » Mon Jan 17, 2005 9:07 pm

As i said it even won't start. Here are my system specs:
SysInfoGenVersion: 2
CpuVendor: AuthenticAMD
CpuModel: Mobile AMD Athlon(tm) XP 2600+
Num Processors: 1
Country: N/A
Language: N/A
Num sound devices: 1
Primary sound device: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Contr
oller (rev 50)
Graphics Card: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (re
v 01)
Operating System: Linux 2.6.8.1-kanotix-epia
Computer Name: lap

and hier is the blackbox.txt
=========================
DARWINIA BLACK BOX REPORT
=========================

VERSION : linux-demo-beta5
ERROR : 'Got a fatal signal: 11
'

=========================
===== SYSTEM REPORT =====
=========================

SysInfoGenVersion: 2
CpuVendor: AuthenticAMD
CpuModel: Mobile AMD Athlon(tm) XP 2600+
Num Processors: 1
Country: N/A
Language: N/A
Num sound devices: 1
Primary sound device: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Graphics Card: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
Operating System: Linux 2.6.8.1-kanotix-epia
Computer Name: lap



=========================
====== USER DATA ========
=========================

USERNAME : sleon

EMAIL : bleon@gmx.net


=========================
====== STACKTRACE =======
=========================



gdb stack trace:

GNU gdb 6.1-debian
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-linux".
(gdb) Reading symbols from /home/sleon/darwinia/lib/darwinia.bin.x86...(no debugging symbols found)...done.
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(gdb) Attaching to program: /home/sleon/darwinia/lib/darwinia.bin.x86, process 8052
Reading symbols from /home/sleon/darwinia/lib/../lib/libSDL-1.2.so.0...done.
Loaded symbols for /home/sleon/darwinia/lib/../lib/libSDL-1.2.so.0
:Reading symbols from /usr/lib/libGL.so.1...done.
Loaded symbols for /usr/lib/libGL.so.1
Reading symbols from /usr/lib/libGLU.so.1...done.
Loaded symbols for /usr/lib/libGLU.so.1
Reading symbols from /home/sleon/darwinia/lib/../lib/libvorbisfile.so.3...done.
Loaded symbols for /home/sleon/darwinia/lib/../lib/libvorbisfile.so.3
Reading symbols from /usr/lib/libstdc++.so.5...done.
Loaded symbols for /usr/lib/libstdc++.so.5
Reading symbols from /lib/tls/libm.so.6...done.
Loaded symbols for /lib/tls/libm.so.6
Reading symbols from /home/sleon/darwinia/lib/../lib/libgcc_s.so.1...done.
Loaded symbols for /home/sleon/darwinia/lib/../lib/libgcc_s.so.1
Reading symbols from /lib/tls/libc.so.6...done.
Loaded symbols for /lib/tls/libc.so.6
Reading symbols from /lib/tls/libpthread.so.0...done.
[Thread debugging using libthread_db enabled]
[New Thread 1077691040 (LWP 8052)]
Loaded symbols for /lib/tls/libpthread.so.0
Reading symbols from /lib/tls/libdl.so.2...done.
Loaded symbols for /lib/tls/libdl.so.2
Reading symbols from /usr/X11R6/lib/libX11.so.6...done.
Loaded symbols for /usr/X11R6/lib/libX11.so.6
Reading symbols from /usr/X11R6/lib/libXext.so.6...done.
Loaded symbols for /usr/X11R6/lib/libXext.so.6
Reading symbols from /home/sleon/darwinia/lib/../lib/../lib/libvorbis.so.0...done.
Loaded symbols for /home/sleon/darwinia/lib/../lib/../lib/libvorbis.so.0
Reading symbols from /home/sleon/darwinia/lib/../lib/../lib/libogg.so.0...done.
Loaded symbols for /home/sleon/darwinia/lib/../lib/../lib/libogg.so.0
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /usr/lib/libXcursor.so.1...done.
Loaded symbols for /usr/lib/libXcursor.so.1
Reading symbols from /usr/lib/libXrender.so.1...done.
Loaded symbols for /usr/lib/libXrender.so.1
Reading symbols from /usr/X11R6/lib/X11/locale/lib/common/xlcDef.so.2...done.
Loaded symbols for /usr/X11R6/lib/X11/locale/lib/common/xlcDef.so.2
Reading symbols from /lib/tls/libnss_compat.so.2...done.
Loaded symbols for /lib/tls/libnss_compat.so.2
Reading symbols from /lib/tls/libnsl.so.1...done.
Loaded symbols for /lib/tls/libnsl.so.1
Reading symbols from /lib/tls/libnss_nis.so.2...done.
Loaded symbols for /lib/tls/libnss_nis.so.2
Reading symbols from /lib/tls/libnss_files.so.2...done.
Loaded symbols for /lib/tls/libnss_files.so.2
Loaded symbols for /lib/tls/libnss_files.so.2
Loaded symbols for /lib/tls/libnss_files.so.2
0x40288b17 in system () from /lib/tls/libc.so.6
(gdb) 1 Thread 1077691040 (LWP 8052) 0x40288b17 in system ()
from /lib/tls/libc.so.6
(gdb)
Thread 1 (Thread 1077691040 (LWP 8052)):
#0 0x40288b17 in system () from /lib/tls/libc.so.6
#1 0x08080688 in ?? ()
#2 0x080809dd in ?? ()
#3 0x080807a0 in ?? ()
:#4 0xffffe440 in __kernel_sigreturn ()
#5 0x402b3a96 in ftello () from /lib/tls/libc.so.6
#6 0x0814a8e4 in ?? ()
#7 0x08152bc9 in ?? ()
#8 0x0814aa29 in ?? ()
#9 0x081486cd in ?? ()
#10 0x08148921 in ?? ()
#11 0x081485aa in ?? ()
#12 0x0815b71f in ?? ()
#13 0x0808c480 in ?? ()
#14 0x0804dcdc in ?? ()
#15 0x080a8aaf in ?? ()
#16 0x080a8c31 in ?? ()
#17 0x08099b30 in ?? ()
#18 0x4025d7f8 in __libc_start_main () from /lib/tls/libc.so.6
#19 0x4037ffcc in ?? () from /lib/tls/libc.so.6
#0 0x40288b17 in system () from /lib/tls/libc.so.6
(gdb) Detaching from program: /home/sleon/darwinia/lib/darwinia.bin.x86, process 8052
(END)


game like vendetta-online works without problems(full 3d). i have not tested other versions of beta.
User avatar
Dave2
level4
level4
Posts: 550
Joined: Wed Feb 20, 2002 9:07 pm
Location: Reading, England

Postby Dave2 » Mon Jan 17, 2005 9:29 pm

Just a quick checklist:
  • Is your sysinfo exactly the same as when you uploaded it first?
  • (Related to this) do you now have lspci available, and you didn't last time (or vice versa)?
sleon
level0
Posts: 5
Joined: Mon Nov 15, 2004 9:21 am

Postby sleon » Wed Jan 19, 2005 4:48 pm

i have workstation and laptop. Darwinia works perfektly on my workstation, now i test it on the laptop.

here is my lspci -vvv ouput :
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 7205
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d1000000-d1ffffff
Prefetchable memory behind bridge: f0000000-f3ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:07.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x20 (128 bytes)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30400000-307ff000 (prefetchable)
Memory window 1: 30800000-30bff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

0000:00:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 4
Region 4: I/O ports at 1c00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1c20 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at 1c40 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Interrupt: pin D routed to IRQ 11
Region 0: Memory at d0004800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 4
Region 4: I/O ports at 1c60 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 80)
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1400 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 4
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at d0004c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 0033
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 4
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
User avatar
John
Introversion Staff
Introversion Staff
Posts: 483
Joined: Sun Dec 10, 2000 6:22 pm
Location: London, UK

Postby John » Thu Jan 20, 2005 5:11 pm

Thanks. You need to upload the system info for the machine you are going to play it on and then download it (that's what the crash above is about).

Return to “Linux Issues”

Who is online

Users browsing this forum: No registered users and 1 guest