Toontrack Metal Month gets big with Randy Staub Rock Solid EZX

General discussion about Multiwinia

Moderators: bert_the_turtle, jelco

stindows
level1
level1
Posts: 57
Joined: Mon Sep 24, 2018 7:54 am

Toontrack Metal Month gets big with Randy Staub Rock Solid EZX

Postby stindows » Fri Nov 09, 2018 5:27 pm

Ludvig Forssell: Well, while we already had a very clear idea of what we wanted the music in The Phantom Pain to be and stand for, the approach to Ground Zeroes was more of a checking the waters with a more wide array of ideas kind of an approach; did we want it to sound reminiscent of the music of Peace Walker or did we want something more foreboding as to what were to come at the end of that story line, leading into The Phantom Pain? In the end we went for something in between, with a hard focus on synthetic sounds to emphasize on the aesthetic look of a military prison camp in the dark rain. I would say that Ground Zeroes definitely focuses on a version of Snake that is close to the original in that he is still the hero from the old games, a guy whose actions will always resonate well with the player. So we let the central tone be way more heroic than that of The Phantom Pain. That being said, there is a sadness and a darkness lurking somewhere beneath; as if to hint at that undertaking the main mission of Ground Zeroes will ultimately lead to Snake and his team’s demise. This is something that seeps out bit by bit as you progress and find out what’s really been going on in Camp Omega.
graduateduser
level1
level1
Posts: 58
Joined: Mon Aug 20, 2018 10:29 am

Re: Toontrack Metal Month gets big with Randy Staub Rock Solid EZX

Postby graduateduser » Fri Nov 09, 2018 5:29 pm

Semi-solid metal casting (SSM) is a virtually net shape production process which gives manufacturers and users of copper alloy parts a substitute and, in several cases, an economical way to manufacture bulk quantities of parts with superior component quality compared to conventional pressure die casting technique.
Image

The capability to apply SSM casting or die-casting with metal in a semi-solid state is an outcome of the successful evolution of a high temperature nickel-base alloy die system. This high temperature nickel based alloy die system prolongs the die life in die casting metals and alloys with high melting temperatures. As the process requires easily available cold chamber horizontal die casting machines as the casting unit; it has the potential for far-flung applications and uses by existing casting professionals equipped with such machines and technology.
graduateduser
level1
level1
Posts: 58
Joined: Mon Aug 20, 2018 10:29 am

Re: Toontrack Metal Month gets big with Randy Staub Rock Solid EZX

Postby graduateduser » Fri Nov 09, 2018 5:29 pm

Semi-solid metal casting is made with metal at a temperature between the temperatures of liquid and solid state, with the fraction solid being in the range of 30-65 percent approximately. The semi-solid billet holds its form and shape and is suitable for loading into the shot sleeve of a traditional die casting machine. For the semi-solid metal to have adequately low viscosity, the structure at the working temperature should comprise of a globular primary solid state surrounded by the liquid state. The technical and economical feasibility of the Semi-solid metal casting process are ascertained, to a great degree, by the approach used to develop the starting stock with the necessary precursor structure.
stindows
level1
level1
Posts: 57
Joined: Mon Sep 24, 2018 7:54 am

Re: Toontrack Metal Month gets big with Randy Staub Rock Solid EZX

Postby stindows » Fri Nov 09, 2018 5:30 pm

It is used to join two different metal parts. The type of welding technique used in a fabrication process depends on the type, thickness, size, shape and property of the metal parts that require joining. Solid Metal Group has all types of welding equipment. We have expert welders who know the job well. You are assured of high quality welds that will meet the highest standards and can withstand high level of stress.

Some metal pieces require stretching or shrinking. A metal piece is heated so that it expands and allows insertion of another metal piece into it. As the heated piece cools and shrinks, it tightens around the second piece. Heating and hammering are used to stretch metal pieces. There are other techniques used to shrink and stretch metal parts. If you want to more details, please visit here Solid Metal Group

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest