What type of NAT does your broadband router do?

The place to hang out and talk about totally anything general.

Winstun.exe reports

Independent filter
46
21%
Dependent filter
15
7%
Port-dependent filter
93
42%
Dependent mapping
29
13%
Open (No NAT)
22
10%
Unknown, Firewall, Failure or Blocked
18
8%
 
Total votes: 223
User avatar
Gramlengo
level1
level1
Posts: 15
Joined: Mon Aug 28, 2006 2:21 pm
Location: Israel
Contact:

Postby Gramlengo » Mon Aug 28, 2006 2:56 pm

Port-dependent filter
Preserves port number
Does not supports hairpin of media
Public IP address: 80.178.xxx.xxx


Using Edimax BR6104K Broadband router.
alphager
level3
level3
Posts: 400
Joined: Fri Jul 28, 2006 1:36 pm
Location: Germany
Contact:

Postby alphager » Thu Aug 31, 2006 10:33 pm

Independent filter
Preserves port number
Supports hairpin of media
Public IP address: 84.168.6.106
User avatar
zerohourrct
level1
level1
Posts: 32
Joined: Thu Aug 31, 2006 7:43 pm
Location: Massachusetts (East Coast USA!)

Postby zerohourrct » Sun Sep 03, 2006 2:50 pm

I use the 'cheap' Linksys router bought from Circuit city (probably the most common that people own, no?) I ran STUN on both the hardwire connected PC and the wireless connected PC (Got 2 PCs here). ISP=Verizon DSL
Both came up on Port-Dependant Filter, most common (40%) ATM :)
rippedcap
level2
level2
Posts: 88
Joined: Fri Feb 24, 2006 8:33 pm

Postby rippedcap » Thu Sep 07, 2006 2:46 pm

Port-dependent filter
Preserves port number
Does not supports hairpin of media


Netgear DG834G

- Rip
DarkArc
level0
Posts: 4
Joined: Sat Sep 16, 2006 12:43 pm

Postby DarkArc » Sat Sep 16, 2006 12:53 pm

So I wasn't going to post but this made me sign up and post as its a little odd:

First time I run it:

Code: Select all

Independent filter
Does not preserve port number
Does not supports hairpin of media


Second time I run it:

Code: Select all

Dependent mapping
Does not preserve port number
Does not supports hairpin of media


It seems to toggle somewhat randomly.

This is using a win2k3 box as a router...
User avatar
NeoThermic
Introversion Staff
Introversion Staff
Posts: 6254
Joined: Sat Mar 02, 2002 10:55 am
Location: ::1
Contact:

Postby NeoThermic » Sat Sep 16, 2006 1:15 pm

DarcArc: Is there some form of adaptive firewall on the network that could cause the change in readings?

NeoThermic
User avatar
TinFoil
level2
level2
Posts: 180
Joined: Mon Jul 25, 2005 7:24 pm
Location: 64-Bit Dedicated Gaming Bubble

Postby TinFoil » Sun Sep 17, 2006 1:48 pm

I just port-forward anything I need to open. Or UPnP can take care of it for me...

EDIT: Oh ja, forgot this...

Code: Select all

Dependent mapping
Preserves port number
Supports hairpin of media
WGR614 v5
Last edited by TinFoil on Wed Sep 20, 2006 11:15 pm, edited 1 time in total.
Slinken
level2
level2
Posts: 188
Joined: Fri Apr 21, 2006 11:58 am
Location: Gävle, Sweden

Postby Slinken » Wed Sep 20, 2006 10:41 pm

Code: Select all

Dependent mapping
Preserves port number
Supports hairpin of media

I'm using Netgear WGR614 v6
User avatar
KingAl
level5
level5
Posts: 4138
Joined: Sun Sep 10, 2006 7:42 am

Postby KingAl » Thu Sep 21, 2006 2:25 pm

Just wrt NAT, I've recently acquired a wireless modem/router, so when DEFCON is out, I can play, on my laptop, unwired against people all over the world. That makes me feel all fuzzy inside. Personally have:
Port-dependent filter
Preserves port number
Supports hairpin of media
DarkArc
level0
Posts: 4
Joined: Sat Sep 16, 2006 12:43 pm

Postby DarkArc » Sat Sep 23, 2006 3:32 pm

NeoThermic wrote:DarcArc: Is there some form of adaptive firewall on the network that could cause the change in readings?

NeoThermic


Win2k3 routing and remote access... I investigated it and it is an independant filter for the first packet and as long as you send data one packet per minute or more often it's a dependant mapping. If necessary I can change almost all aspects of it I think...
User avatar
GoM
level0
Posts: 3
Joined: Mon Sep 25, 2006 3:47 am
Location: Switzerland (Luzern)
Contact:

Postby GoM » Tue Sep 26, 2006 10:05 pm

Independent filter
Does not preserve port number
Supports hairpin of media
Public IP address: xx.xxx.xx.xxx

I have a D-Link Router

DI-824VUP+ firmware v1.05b04
lljk
level0
Posts: 9
Joined: Fri Oct 12, 2001 5:23 pm

Postby lljk » Sat Sep 30, 2006 1:53 pm

Independent filter
Preserves port number
Does not supports hairpin of media

Linksys BEFSR41v4 here.
User avatar
Laiskumus
level0
Posts: 3
Joined: Wed Aug 23, 2006 6:47 pm
Location: Finland
Contact:

My Nat

Postby Laiskumus » Tue Oct 10, 2006 2:52 pm

That's what I got from it.... I chose Dependendent Filter in the poll because there wasn't INdependedt mapping.

STUN client version 0.96
Primary: Independedt Mapping, Address Dependendent Filter, random port, no hairpin
Return value is 0x000014

EDIT: I have a D-Link router (Firewall, Switch, wlan) connected to a Telewell (firewall, Integrated Voip) Adsl-modem.
User avatar
world idiot
level4
level4
Posts: 588
Joined: Mon Dec 18, 2006 8:37 pm
Location: losing miserably (as always)

Postby world idiot » Tue Jun 05, 2007 7:06 pm

Slinken wrote:

Code: Select all

Dependent mapping
Preserves port number
Supports hairpin of media

I'm using Netgear WGR614 v6


exactly the same over here
User avatar
xander
level5
level5
Posts: 16869
Joined: Thu Oct 21, 2004 11:41 pm
Location: Highland, CA, USA
Contact:

Postby xander » Tue Jun 05, 2007 7:13 pm

Again, this is an old topic that no longer has any great relevance. There is no need to bump it. Please, before you continue bumping old threads, make sure that you have something important to add.

xander

Return to “Introversion Lounge”

Who is online

Users browsing this forum: No registered users and 2 guests