LAN Isolation Bridge

Stuck in Uplink? Need Help?

Moderators: jelco, bert_the_turtle, Chris, Icepick, Rkiver, Punisher Bass

SyzBeta
level0
Posts: 2
Joined: Mon Nov 28, 2011 3:58 am

LAN Isolation Bridge

Postby SyzBeta » Sat Dec 03, 2011 6:46 pm

So I'm going through the ARC LAN. I have the highest level software and hardware, and everything I need to hack the LAN. However, I can't figure out how to proceed farther. There are four terminals connected to a hub. Three are in a row, and the fourth to the side is just a terminal, and when I select it, it puts a yellow box around the other three and they say subnet. Right under the bottom of the three is a lock (Icon is practically on top of it), and off to the side is an isolation bridge and farther down another lock, with a modem to the far side. However, I can't find any way to connect to the isolation bridge or do anything else. I've tried spoofing to all four terminals and then connecting to everything else. I've run lan scan several times and lan probe on everything several times. I can't find anything to connect to. None of the terminals contain anything. What do I have to do to remove the lock?

Return to “Hints and Tips”

Who is online

Users browsing this forum: No registered users and 9 guests