Good morning.
I am on the ARCInfiltration mission & I have managed to scan the LAN & get quite far in the network. After the transmitter, there is only one authentication server & nothing else around it: just that one authentication server. If I probe the authentication server, a yellow box like though around the locks appears randomly in the middle of the LAN. There's no picture of a key or anything, just the yellow box & the words underneath. I can't probe it nor can I find any way to get to it & I can't advance any further in the mission.
Any help would be appreciated since I can't move on in the game at all with this problem.
Thanks a lot for your help in advance.
Possible ARCInfiltration bug (pictures)
Moderators: jelco, bert_the_turtle, Chris, Icepick, Rkiver, Punisher Bass
Possible ARCInfiltration bug (pictures)
Last edited by Cæn on Tue Jul 19, 2011 1:30 pm, edited 2 times in total.
Probe EVERYTHING again. For things that have two states, such as Locks, probe them in each state (i.e. enabled and disabled).
Connect to EVERY terminal again and look for an IP or another frequency.
There's definitely portions of the LAN you haven't accessed but without being able to see everything we can't help much more than stating the above generic advice. It will probably be easier if you just upload your .usr file to sharebee.com so others can play on the LAN and tell you what you missed. If you do that though, create and save the bounce chain for connecting to the main portion of the LAN so who ever takes it on can just load it and connect.
Connect to EVERY terminal again and look for an IP or another frequency.
There's definitely portions of the LAN you haven't accessed but without being able to see everything we can't help much more than stating the above generic advice. It will probably be easier if you just upload your .usr file to sharebee.com so others can play on the LAN and tell you what you missed. If you do that though, create and save the bounce chain for connecting to the main portion of the LAN so who ever takes it on can just load it and connect.
I've probed everything over & over. There was one terminal that gave my the radio frequency (which is what I used on the transmitter/receiver) & another which gave me a phone number (but I haven't found a modem yet). I'll up load my .usr now for you.
Edit: just my luck that sharebee.com's upload service is down for about an hour. Would you like me to take a picture of the rest of the LAN for you?
Edit: just my luck that sharebee.com's upload service is down for about an hour. Would you like me to take a picture of the rest of the LAN for you?
- mr_anonymous
- level3
- Posts: 461
- Joined: Tue Jul 05, 2005 2:06 am
- Location: unknown
As mr_anonymous suggests, enter the IP/number into IP_lookup and connect to the newly added node on your map. You should then be on the disjoint portion of the LAN.
Also, there are alternatives to sharebee such as Rapidshare, Megashare, etc.
Also, there are alternatives to sharebee such as Rapidshare, Megashare, etc.
Last edited by Montyphy on Tue Jul 19, 2011 8:02 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 7 guests