Iam stuck at my first LAN, what to do?
Screenshots:
To the left:
Little to the down/south
Reset-to the right
In the middle:
All my LAN software is V.3 and the highest upgreat.
I hacked all I saw in the lan, but afther hacking the terminal, I dont know where to go.
Hacked terminal:
Hacking the first LAN
Moderators: jelco, bert_the_turtle, Chris, Icepick, Rkiver, Punisher Bass
See that local dial up number, that's where you go next.
Also you didn't need to post this in two places. I've deleted the other one.
Also you didn't need to post this in two places. I've deleted the other one.
Uplink help: Read the FAQ
Mah wrote:Thanks mate, but I dont really know how to use the dial-up number.
Do I need to use the IP-lookup and connect to it with bouce, or do I need to use it in someway within the lan-system?
Read this.
The above post is not intended as an attack on you. It's not about making you look stupid for not searching. It merely states the facts. Please don't be offended.
Looks like you didn't finish revealing everything on the first portion of the LAN (note all those unconnected nodes). Did you LAN_probe every node (LAN_probe is better than LAN_scan)? When probing locks they have to be unlocked/disabled for LAN_Probe to work properly. When you click the lock does a yellow box appear anywhere (move the view point around to make sure)? If probing everything (even that terminal after the lock) doesn't reveal anything that controls that lock then you have to use LAN_force on it. This will cause the admin to log on but you can disconnect then reconnect and the lock will remain open.
Reading through this topic and this one should be enough to tell you everything there is to know about LANs.
If after all that you still can't reveal the entire LAN, upload your usr and tmp file (with the bounce connection saved) to Sharebee so I can have a look.
Reading through this topic and this one should be enough to tell you everything there is to know about LANs.
If after all that you still can't reveal the entire LAN, upload your usr and tmp file (with the bounce connection saved) to Sharebee so I can have a look.
The above post is not intended as an attack on you. It's not about making you look stupid for not searching. It merely states the facts. Please don't be offended.
As asked in my previous post, when you click the lock does a yellow box appear anywhere? The answer is yes, and it is a hint of where to search:
In this case, you failed to disable the lock before using LAN_probe on it:
When you've revealed the entire LAN you should end up with something like this:
Note: Subnets are explained in one of the topics I linked to.
In this case, you failed to disable the lock before using LAN_probe on it:
When you've revealed the entire LAN you should end up with something like this:
Note: Subnets are explained in one of the topics I linked to.
The above post is not intended as an attack on you. It's not about making you look stupid for not searching. It merely states the facts. Please don't be offended.
LAN Fail???
I'm doing mission for Arunmor when I must hack the ARC Local Area Network, I finally find a terminal with Dial-Up number, but when i connect there, there is just Modem and Main server, so i haven't enough time for copy files. I can use "Voice analyser" and Decypher" than i can go to "files", but than the administrator disconnect me
Who is online
Users browsing this forum: No registered users and 13 guests